บริษัท สปริงบอกซ์ จำกัด

Tel. : 0-2308-2994  |   Fax. : 0-2308-2995  |  E-mail. : info.springbox@gmail.com

Leica : DISTO™ D810 Touch

















Bluetooth Smart (4.0)

Send measurements directly to your apps using Bluetooth Smart. See our App Directory for a list of apps that all kinds of professionals are using to transform the way they work. See our blog for more information about device compatibility. The Leica DISTO™ Plan App lets you take a picture with your iPhone or Android and layer measured lines on top of it.


Measure in Picture

Follow these 5 simple steps: 
      1.Using a tripod or FTA360, locate your D810 touch perpendicular to the object you’re measuring and switch it on. 
      2.From the FUNC touchscreen, select the MWP icon . 
      3.Use the “pinch-zoom” on the touch screen so the measured object fills >50% of the D810 touch display 
      4.Press the MWP key once to switch on the laser. Aim to the object’s center. Press the MWP key again to measure the distance. 
      5.Touch and activate the left arrow in the display (becomes red) the use the “+” and “-” touch keys to align the arrow to the left side of the object. Repeat
         for the right side of the object. The width is updated on the display, typical accuracy is 1% of the width. 


Stake Out Function

The stake out function uses the continuous measurement mode to indicate where to place stakes along a stake-out line. Ideal for any situation where you need to place objects at a consistent interval. The display shows the distance to the next stake out point and the DISTO™ beeps as you approach it.


Triangle / Room

The simple area function is great when a room is a square or rectangle, but what if you have to determine the area of a room that has more than four corners? That is where the triangle function comes in. Divide the room into imaginary triangles, take three shots for each and then add them up. The DISTO™ will also tell you circumfrence and the angle of the triangle.


Pythagoras Function

Take indirect height and width measurements using the Pythagorean Theorem. Three Point Pythagoras The key is to make sure your second shot -- the "rectangular shot" -- is perpendicular to the point you are measuring, shown as the 90° angle in the images. The best way to ensure accuracy is to use a tripod and an adapter.


Smart Horizontal™ Mode

Use Smart Horizontal™ to determine the level horizontal distance to a target when you have to shoot over an obstacle. The onboard 360° tilt sensor provides an angle measurement so the software can do the math to figure out how much to subtract from the angled shot to get the actual horizontal distance.


Height Tracking

"Real time" height tracking for situations where you can hit a reflective target (like the ground) on the low end, but not at the top. Perfect for measuring the height of an overhead wire.



Height Profile Tracking

Measure slopes with multiple shots. Each shot is stored as a profile pair that references the step before it.


Diameter

The Diameter function uses Measure in Picture technology to determine the diameter of cylindrical objects, like tanks. The read out also provides circumfrence (top number) and circular area.


Single Measurement 660ft Range

The big receiver lens and the module it is connected to can see a laser dot outside at distances of over 600 ft, depending on conditions.


Painter Function

When the DISTO™ is in area or volume mode, you can use the add / subtract function to total up the area of several surfaces, or subtract an area, like a door for example, from a measurement.


Min / Max Function

In Min/Max mode, you "sweep" the laser point into a corner. The longest measurement is recorded. Very useful for accurate diagonal room or window/door measurements.


Sloped Object Measurement

Indirect distance measuring between two points. The reported measurements also include the horizontal distance between the two points, the vertical distance between the two points, and the angle between the points.


Area / Volume

In area mode, the DISTO™ determines the area of a rectangle or square in two shots. Volume mode adds a third vertical shot to calculate volume.


Trapezium Function

The Trapezium Function is useful for determining the length and slope of a roof section, and the area it covers. The DISTO™ uses the its internal tilt sensor to calculate the angle and the distance between the shots, which means you can measure roofs accurately from the ground.


Touchscreen

The D810 Touch & S910 are touchscreen laser distance measures. In addition to making it easier for you switch between the functions, you can use familiar pinch and expand motions on the touchscreen to zoom the camera in or out. In Measure in Picture mode, you can tap and hold the brackets used to identify the points in the picture that you want to measure.


4x Zoom Pointfinder camera

The onboard digital camera features a 4x digital zoom "point finder" that shows you where the dot is even if you can't see it with the naked eye. Put the crosshairs on the spot you are measuring to and hit the button. 


360° Tilt Sensor

Functions that need to know the angle of the DISTO™ when the shot is taken are enabled by a highly accurate 360° tilt sensor that determines the angle of the laser. These include Smart Horizontal and Height Tracking modes.


Intelligent Endpiece

The endpiece is an integral part of the tool, connected to the circuit board. In the closed position the DISTO™ knows to measure from its base. Flip it open 90 degrees to align the base perfectly on an edge or corner. Flip it out all the way and you can put this baby in a corner to accurately measure diagonals. Otherwise, the width of the base would prevent you from getting all the way into the corner, rendering the measurement inaccurate.


Add & Subtract

It's not always so simple as taking one shot to get the measurement you need. Sometimes its handy to add multiple shots together, or subtract a negative space from a measurement. As you use the Add/Subtract function, the final result is displayed in the main line, and the last measurement taken is shown above.


Ingress Protection Rated

The Ingress Protection (IP) rating was developed by the European Committee for Electrotechnical Standardization (CENELEC) to create a standard of toughness. The first number, in this case a 5 out of 6, is the rating for protection against dust. The second number, in this case a 4 out of 8, is the rating for protection against liquids.


Compass


The D810 touch is like that big Swiss Army knife you always wanted, the one with all the doodads. The compass is useful for answering questions like, "Wait. Is this the north elevation or the west elevation?" or "Which way am I facing?"  



Memory stores 30 Displays

Store measurements and images with measurements associated with them.


Timer

Set a timer to delay a measurement the same way you would with the shutter on a digital camera.


USB Port
The Lithium Ion battery is recharged via a mini-USB. Plug it into the wall for fast charging, or plug it into a computer to charge and access the image gallery.


Rechargeable Battery
This DISTO™ will take approximately 4000 measurments per charge. The 3D Disto will typically last a full working day of 8 hours.



Dual Lense Cameras

The dual lense digital camera employs a wide field lens and a 4x zoom lens to power Measure in a Picture (MIP) technology -- the most advanced handheld remote measurement technology currently available. Combined with the data returned by the laser and the tilt sensor, the software uses the fixed focal lengths of the lenses to determine height, width, and area in MIP mode or the circumference and volume in Measure a Cylinder mode. The unit stores images with measurements laid over them for recall on the device or to download later, an especially useful feature for as-built measuring or Building Information Modeling (BIM). 



Personalize Favorites

With over 20 functions, chances are you are going to use one or two more than the rest. This Favorites function lets you bookmark your most-used functions on the tabs at the bottom of the touch screen.


Leica DISTO™ Sketch App





The DISTO™ sketch app supports the new Leica DISTO™ models from Leica Geosystems. With this laser distance meters you can even directly transfer measuring data right into a sketch or photo via Bluetooth 4.0 technology.

With the new sketch gallery you have all your sketches at a glance.
- experience your sketches as easy as a gallery
- with time stamps you can see when you created your sketches
- with geo-tagging you can see where you created your sketches

                    

 

  Specifications

ISO 16331-1 certified typical measuring accuracy

±1 mm

ISO 16331-1 certified typical measuring range

up to 200 m

Measuring units

0.000 m0.0000 m0.00 m0.00 ft, 0'00" 1/32,
0.00 in0 in 1/32

Power Range Technology

Yes

Pointfinder with 4x zoom

Yes

Overview camera

Yes

Photograph file format

.jpg

Memory

Last 30 displays

Windows Software

DISTO Transfer with AutoCAD® plugin

Free App

iOS / Android

Data interface*

Bluetooth® V4.0 Smart

Measurements per set of batteries

up to 4000**

Multifunctional end-piece

Automatic recognition of measurement position

Batteries

Li-ion rechargeable

Tripod thread

¼”- 20

Protection class

IP 54 - splash water/ dust proof

Dimensions

164 x 61 x 31 mm 

Weight with batteries

238g

   * Depending on ambient light and reflectivity of the target surface.